aerogard


Our virtually clear abrasion resistant aerospace film is by far the best in the industry. You don't have to settle for 1st or 2nd generation paint protection film technology any longer!

ClearMask personnel worked with 3M's Aerospace division to develop Aerogard, the most sophisticated leading edge automotive paint protection system in the industry.

This virtually optically clear, non yellowing product allows the true high gloss of modern vehicle paint to shine through undistorted while protecting the valuable finish beneath.

The unique user friendly adhesive system has been thoroughly tested for aviation use at Wright Patterson Air Force Base. The combination of flexibility, durability, transparency and aerospace quality adhesive system make Aerogard the finest paint protection film money can buy.

 
  Aerogard is shipped in three layers: this image shows the white layer, protecting the adhesive, the film, and a cap sheet. Both the white layer and the cap sheet are removed at installation.

Aerogard™ polyurethane
Protective Film is made from an abrasion resistant elastomer that resists punctures, tearing, abrasion and corrosion. It is formulated for resistance to ultraviolet light, corrosion, abrasion and minor impact damage. Our film is constructed with a long-aging, solvent resistant, pressure sensitive acrylic adhesive that is protected with an easy release poly liner.

Notes:

1. The following technical information and data should be considered representative or typical only and should not be used for
specification purposes.

2. ASTM = American Society for Testing and Materials.

3. Metric values are listed in parenthesis.

Property
Method
Units
Value
Tensile Strength @ Break
PSTC - 133
lb/in (N/100 mm)
54 lb/in
Elongation % @ Break  
%
760
Minimum Continuous Temperature  
F ( C)
-10 F (-23C)c
Maximum Continuous Temperature  
F ( C)
212 F (100C)
Minimum Intermittent Temperature  
F ( C)
240 F (116C)
Peel Adhesion @ 70 F (21 C) to:
PSTC - 133
oz/in (N/100 mm)
60 oz/in
Dimensions
     
Approximate Applied Thickness: 0.006 inch (0.15 mm) Film
0.002 inch (0.05 mm) Adhesive
0.008 inch (0.20 mm) = Total thickness

Aerogard Ultra is the trademark of ClearMask Protective Films LP

Dealer Login:
Username
Password
Not a dealer yet? Register now!
Forgot password? Click here!
Special Noteworthy Items
Not in the budget to buy a whole roll of film? We sell partial rolls of film in standard widths. Buy a1/2 roll of film at same price/per square foot as a
whole roll. >>

Dealer Parts Catalog
ClearMask DS Software User Manual I
ClearMask DS Software User Manual II


Request a Design >>

 
 
Copyright © 2004-2020 www.ClearMask.com All Rights Reserved
Untitled Document